Bipods and Monopods

Harris BiPod Hinged Base 6-9 inches S-BR

• ideal universal sharpener

• improved version of the orginal leg noth bipod

• legs eject by spring action

• seven height setting from 6 to 9 inches

• hinged base

Harris BiPod Hinged Base 9-13 inches S-LM

• ideal universal sharpener

• improved version of the orginal leg noth bipod

• legs eject by spring action

• seven height setting from 9 to 13 inches

• hinged base

Harris Bipod Adapter Flat Bottom 2-4in

• For flat bottom stocks

• Adapter holds bipod in proper alignment

• Fits bench rest type fore-ends from 2 inches to 4 inches in width

• Stud is required on fore-end

• Made in the USA

Harris Bipod 1A2-BR2 Rotate Self Level 6-9 in

• Extends from 6 to 9 inches

• Attaches to sling swivel stud

• Quick deploy spring loaded self leveling legs

• Solid base; Ultralight weight

• Most useful for shooting off the bench

Harris BiPod Solid Base 9-13 inches 1A2-L

• versatile, sturdy, light and fast

• made from high strength anodized aluminum alloy

• stressed parts are tempered spring steel

• bipods clamp to most Q.D. stud-equpped bolt action rifles and have sling attachment probision and adjustment foroff center stud

• spring loaded folding legs are quickly adjustable for height

Harris Bipod Adapter Mini 30 and 14

• For Ruger Mini-30 and Mini-14

• Fits standard and ranch rifles

• Will not fit the 180 series or Ruger folding stock

• Carry sling fits adapter or bipod clamp with Q.D. sling swivel

• Quick detachable

• Weight 3 ounces

• Made in the USA

Harris Bipod Adapter Flange Nut

• Allows mounting of stud on hollow plastic fore-ends

• Flange is 0.625 inches wide by 1.375 inches long with a 10-32 threaded hole

• Stud and washer provided

• Purpos of the big-headed flange nut is to provide more support for the sling stud on thin walled fore-ends

• Made in the USA

Harris Bipod Adapter Radius Flange Nut

• Has radiused flange for mounting to wood or polymer fore-ends under gas tubes

• Flange has 0.75 inch radius

• Made in the USA

Harris Bipod Adapter Remington 4-74-7400

• Fits Remington Semi-automatic rifles, Models No. 4, 74 and 7400

• Consists of two-parts, the base and the fore-end screw

• Made in the USA

Harris Bipod Adapter AR-15 Round H G

• Fits AR-15 and M16 standard handguards without alteration

• Made to fit AR-15 round handguard

• Will not fit the older triangular type hand guard

• Package contains a perforated flange with a threaded shank, a rectangular washer, a Q.D. stud and a sling swivel

• Made in the USA

Harris Bipod Adapter European Rail

• For European size Rails

• 0.375 inch across rail slots

• Slides into 0.375 inch rails and locks in place with a set screw

• Made in the USA

Harris BiPod Hinged Base 12-25 inches S-25

• ideal universal sharpener

• improved version of the orginal leg noth bipod

• legs eject by spring action

• seven height setting from 12 to 25 inches

• hinged base

Harris S-25CPCAMO Krptek Picatinny 13.5-27 in

• Extends from 13.5 to 27 in

• Attaches to Picatinny rail only

• Swivels and tilts to compensate for uneven terrain

• Smooth legs; Ultralight weight

• Built in sling swivel stud to attach a sling

• Ideal for sitting position

• Tallest of bipods, useful in snow and grass; May be better suited for the very tall

Harris S-L M-LOK 9-13 in Rotating Bipod

• Extends from 9 to 13 inches

• Attaches to M-LOK compatible forend or hand guard

• Swivels and tilts to compensate for uneven terrain

• Smooth legs; Ultralight weight

• Ideal for prone position or bench rest

Harris Bipod Adapter Round Flange Nut

• 0.625 inch round head flange nut

• Works well with Ruger Model 77 Synthetic stocks

• Made in the USA

Harris Bipod Adapter Universal Barrel Clamp

• Universal barrel adapter – Attaches to barrel not stock

• Fits barrels from .550 inch diameter to .812

• Requires 2 inches of uncluttered barrel for mounting; Requires 6 inch or longer barrel

• Hinged mounting bracket allows bipod legs to fold backward

• Best application is on single shot pistols; Not recommended for shoulder guns

• Mounting bipod on rifle barrels may affect accuracy

• Made in the USA

Harris Bipod Stud Adapter XP-100 Plastic

• For Remington XP-100 synthetic stock

• Includes cylindrical nut, the quick detachable stud, and the rubber spacer

• Requires drilling for installation

• Made in the USA

Harris Bipod Adapter Spacer Thin Forend

• Rubber spacer may allow mounting on thin fore-ends and Schnable type fore-ends

• Reversable to change angle of bipod

• Made in the USA

Caldwell AR Bipod Prone Dessert Prone

• Quickly attaches/detaches to any picatinny rail.

• Lightweight and durable anodized aluminum construction.

• Available in Matte Black finish or new Desert Tan.

• Prone Model 7.5" to 10".

• Rubber feet ensure good grip on all surfaces.